4.1.3 4-WIRE CONNECTION USING TERMINAL BLOCKS

If your RS-485 application requires you to connect two pairs of bare wires to the Model 2085, you will need to open the case to access the terminal blocks. The following instructions will tell you how to open the case, connect the bare wires to the terminal blocks, and fasten the strain relief collar in place so that the wires won't pull loose.

1.You should already have the case open for the configuration procedure. If not, open the case according to the diagram in Section 3.2.

2.Strip the outer insulation from the twisted pairs about one inch from the end.

3.Strip back the insulation on each of the 2 twisted pair wires about .25".

4.Connect one pair of wires to XMT+ and XMT- (transmit positive and negative) on the terminal block, making careful note of which color is positive, and which color is negative.

5.Connect the other pair of wires to RCV+ and RCV- (receive positive and negative) on the terminal block, again making careful note of which color is positive, and which color is negative.

Ultimately, you will want to construct a two pair cross over cable that makes a connection with the RS-485 device as shown below:

Model 2085

RS-485 Device

XMT+

RCV+

XMT-

RCV-

RCV+

XMT+

RCV-

XMT-

6.If there is a shield around the telephone cable, it may be connected to "G" on the terminal block. We recommend connecting the shield at the computer end only to avoid ground loops. A ground wire is not necessary for proper operation of the Model 2085.

7.When you finish connecting the wires to the terminal block, the assembly should resemble the diagram below:

+RCV- G -XMT+

8.Place the 2 halves of the strain relief assembly on either side of the telephone wire and press together very lightly. Slide the assembly so that it is about 2 inches from the terminal posts and press together firmly. If your cable diameter is too small or too large for our strain relief, please contact our technical support. We have strain relief assemblies to accommodate most cable diameters.

+RCV- G -XMT+

(continued)

11

12

Page 6 Page 8
Page 7
Image 7
Patton electronic 2085 user manual 3 4-WIRE Connection Using Terminal Blocks, Model RS-485 Device
Page 6 Page 8

2085 specifications

The Patton Electronics 2085 is a robust and versatile solution designed for efficient data communication over twisted pair lines. Ideal for both residential and industrial applications, this device guarantees reliable performance and high-quality data transfer.

One of the main features of the Patton Electronics 2085 is its capability to support high-speed data transmission, making it an excellent choice for users requiring efficient connectivity. With a data rate of up to 10 Mbps, it ensures that large volumes of data can be transferred quickly, accommodating the increasing demand for speed in modern networks.

Another significant characteristic of the 2085 is its advanced modulation techniques, which include Carrierless Amplitude Phase (CAP) and Discrete Multitone (DMT) modulation. These technologies enhance the reliability of data transmission by maximizing the use of existing telephone lines. With these modulation techniques, users can expect stable connections even in challenging environments, demonstrating the device's resilience.

The Patton 2085 is built with versatility in mind, offering various operating modes. It can function as a simple transparent modem or as a more complex remote access server. This dual functionality caters to a broad range of applications, from connecting remote terminals to accessing local area networks.

Furthermore, the unit boasts an easy-to-use interface, facilitating seamless installation and configuration. The front panel includes LED indicators to provide real-time feedback on the link status and power. This attention to user experience simplifies troubleshooting and ensures that users can maintain optimal performance.

In terms of connectivity, the 2085 features standard RJ-45 ports for Ethernet connections, allowing for straightforward integration into existing setups. The device operates well in point-to-point and multipoint configurations, providing flexibility for varying network topologies.

Security is also a paramount feature of the Patton Electronics 2085. It includes built-in encryption capabilities, safeguarding against unauthorized access and data breaches. This makes it particularly suitable for sensitive environments where data integrity is a critical requirement.

In conclusion, the Patton Electronics 2085 stands out as an effective solution for those seeking reliable and high-speed data transmission over twisted pair lines. With its impressive feature set, advanced technologies, and user-friendly design, it remains a compelling choice in the realm of electronic communications. Whether utilized in industrial setups or home networks, the 2085 delivers solid performance and adaptability to meet diverse connectivity needs.
Top Page Image Contents