Patton electronic 2135 user manual Section, Radio and TV Interference, CE Notice

	Section		TABLE OF CONTENTS	Page
1.0	Warranty Information			2
	1.1	Radio and TV Interference
	1.2	CE Notice
	1.3	Service
2.0	General Information			4
	2.1	Features
	2.2	Description
3.0	PPP Operational Background			5
	3.1	Applications
4.0	Installation		............................................................................	7
	4.1	Connect to 10BaseT Ethernet Port
		4.1.1	Connect the 10BaseT Ethernet Port to a Hub
		4.1.2	Connect the 10BaseT Ethernet Port to a PC (DTE)
	4.2	Connect to the DTE Interface
	4.3	Power Connection
		4.3.1 AC Power Supply (100-240VAC)
		4.3.2	DC Power
5.0	Configuration			9

5.1LED Status Monitors

5.1.1LAN side LEDs

5.1.2LED Descriptions

5.1.3Power and DCE/DTE Interface LEDs

Appendix A - Specifications	12
Appendix B - Factory Replacement Parts	13
Appendix C - 10BaseT Interface Pin Assignment	14
Appendix D - Terminal Interface Pin Assignment	15
Appendix E - Power Supply Interface	16

1

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 2135 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.

This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modifi- cation. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequen- tial damages arising from the use of or inability to use this product. Patton Electronics specifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.

1.1 RADIO AND TV INTERFERENCE

The Model 2135 generates and uses radio frequency energy, and if not installed and used properly—that is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and tele- vision reception. The Model 2135 has been tested and complies with the limits for a Class A computing device in accordance with the speci- fication in Subpart J of Part 15 of FCC rules, that are designed to pro- vide reasonable protection from such interference in a commercial installation. However, this is no guarantee that interference will not occur in a particular installation. If the Model 2135 does cause interfer- ence to radio or television reception, which can be determined by dis- connecting the unit, the user is encouraged to try to correct the inter- ference by one or more of the following measures: moving the com- puting equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment and receiver are on different branches). In the event the user detects intermittent or continuous product malfunction due to nearby high power transmitting radio fre- quency equipment, the user is strongly advised to use only a shielded twisted pair data cable that is bonded to metalized external outer shield plugs at both ends. The use of a shielded cable satisfies compliance with the Electromagnetic Compatibility (EMC) directive.

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the Union European (EU). A Certificate of Compliance is available by contacting Patton Technical Support.

2