Patton electronic 2500 Series user manual FCC Information, Service Information, Product Overview

1.3 FCC INFORMATION

The Model 2500 Series has been tested and registered in compliance with the specifications in Part 68 of the FCC rules. A label on the equipment bears the FCC registration number. You may be requested to provide this information to your telephone company.

Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper operation of the Model 2500 Series. If this happens, the telephone company should give you advance notice to prevent the interruption of your service.

The telephone company may decide to temporarily discontinue your service if they believe your Model 2500 Series may cause harm to the telephone network. Whenever possible, they will contact you in advance. If you elect to do so, you have the right to file a complaint with the FCC.

If you have any trouble operating the Model 2500 Series, please contact Patton Technical Support at (301) 975-1000. The telephone company may ask you to disconnect the equipment from the telephone network until the problem has been corrected or until you are certain that the Model 2500 Series is not malfunctioning.

The following information may be required when applying to your local telephone company for leased line facilities:

	Service	Digital Facility	Service Order	Network
	Type	Interface Code	Code	Jacks
2.4	Kbps Digital Interface	04DU5-24	6.0F	RJ48S
4.8	Kbps Digital Interface	04DU5-48	6.0F	RJ48S
9.6	Kbps Digital Interface	04DU5-96	6.0F	RJ48S
56	Kbps Digital Interface	04DU5-56	6.0F	RJ48S

(Note: As of this publication date, 19.2 and 64Kbps digital services have not been assigned Digital Facility Interface Codes)

1.4 SERVICE INFORMATION

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Service at (301) 975-1007. Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 2500 Series. Technical Service hours: 8AM to 5PM EST,

Monday through Friday.

3

2.0 PRODUCT OVERVIEW

This section provides an overview of the Model 2500 Series, including features, general description, and a breakdown of model numbers by application.

2.1PRODUCT FEATURES

•Operates over 4-wire dedicated digital lines

•Supports rates of 56 kbps and 64 kbps and all sub rates

•Supports Switched 56 dialing

•Provides both RS-232 and V.35 interfaces

•Features V.52 and V.54 compliant tests

•Nine easy-to-read LED indicators to monitor data signals

•Internal, external or received loopback clocking

•AT&T 62310 compliant

•Can be used as a high speed modem for private twisted pair

•Available in rack card and clusterbox versions

•Made in the USA

2.2GENERAL PRODUCT DESCRIPTION

The Model 2500 Series CSU/DSUs operate either synchronously or asynchronously over 4-wire circuits up to 64 kbps. Rate conversion allows operation with a variety of DTE devices. Diagnostics include V.54 and V.52 loopback tests, as well as CSU loops. Configuration is accomplished by either externally accessible DIP switches or RS-232 software switches (user provides terminal). Nine easy-to-read front panel LED indicators monitor data and control signals. The rear panel presents both RS-232/V.24 and V.35 DTE connections.

The Model 2500 Series is AT&T compliant and supports DDS, Switched 56, Clear Channel 64 and other digital services available from major service providers including AT&T, Sprint and MCI. Dedicated models can also be used as a high speed modem for private twisted pair. The Model 2500 Series is available in standalone or in rack-card configurations (only standalone versions are covered in this manual).

4