Patton electronic 2720 T1 Application-LAN-to-LAN without a router, Netlink T1/FT1 product family

Application—LAN-to-LAN without a router

Connecting a remote LAN to headquarters has never been easier—or more economical! Place one Model 2720/I at each LAN location, use MAC and PPP/BCP bridging in the Model 2720s to provide seamless LAN-to-LAN connection over the wide-area T1 network.

Netlink T1/FT1 product family

	2720/C		2720/B	2720/I	2710RC/A/I	2710RC/B/B	2710RC/C/IA
DTE Interface	V.35		EIA-530	10Base-T	V.35	EIA-530	10Base-T
Power Supplies		UI (100–240 VAC) or -48 VDC				AC or DC rack power supplies
Dimensions	1.50 H x 4.17 W x 5.84 D inch (3.84 H x 10.6 W x 14.84 D cm)				3.0 H x 0.83 W x 7.84 D inch (7.6 H x 2.1 W x 19.0 D cm)
Weight			1.0 lbs (0.45 kg)			0.31 lbs (0.14 kg)
Line Rate	1.544 Mbps (T1/FT1)
Line Connector	RJ-48C (100 ohms)
Line Coding	AMI or B8ZS
Line Framing	D4 or ESF
DS0 Start Position	Any position, contiguous/non-contiguous mapping when configured via VT-100 console
Line Build-Out	Receiver: automatic. Transmitter: 0, -7.5, -15, -22.5 dB, DSX-1 level
DTE Interface	V.35 (M/34 female), EIA-530 (DB-25 female), or 10Base-T Ethernet (RJ-45 female)
DTE Rates	nx56/nx64 kbps (V.35, EIA-530); nx56/nx64 kbps to 10Base-T (10 Mbps)
Clocking	Smooth clocking—internal, external, or network
Diagnostics	V.54 local/remote loop; responds to CO-initiated loop-up and loop-down codes. ESF line-loop and payload FDL messages. Diagnostics patterns: 511, 2047, and QRSS
Compliance	FCC Part 15 Class A and Part 68. AT&T 62411, TR54016, ANSI T1.403
Temperature/Humidity	32 to 122°F (0 to 50°C)/5 to 90% relative humidity, non-condensing

7622 Rickenbacker Drive

Gaithersburg, MD 20879 USA

Phone +1-301/975-1000

Fax +1-301/869-9293

E-mailmarketing@patton.com

URL www.patton.com

07MD2720-DS1