OnSite Model 2884 User Manual

4 • Initial configuration

 

 

Connecting and logging in via the Console port

To access the OnSite configuration via the console port, connect the DB9-RJ45 adapter to the DB-9 serial port on the PC or dumb terminal. Use the RJ45 straight-through cable between the adapter and the console port on the 2884. (see figure 11). Do NOT connect the device to the Ethernet LAN now. On the PC, start a HyperTerminal session at 19200 bps, 8 data bits, 1 stop bit, no flow control, and no parity. Log into the unit using the username admin. Leave the password field empty.

1A

Hz,

Power50/60 -240V, ~ 120

 

Console

0/1

-232

ETH

RS

0/0

ETH

0/3

0/2

 

0/1

0/0

T1/E1

Connect to Console port

IPLink 2884

192.168.200.10PC

DB-9 serial port

RJ45 to DB-9 adapter

Figure 11. Connecting the OnSite to your laptop PC via the console port

2. Configuring the desired IP address

Factory-default IP settings

The factory default configuration for the Ethernet interface IP addresses and network masks are listed in table 6. Both Ethernet interfaces are activated upon power-up.

Table 6. Factory default IP address and network mask configuration

 

IP Address

Network Mask

 

 

 

LAN interface Ethernet 0 (ETH 0)

192.168.200.10

255.255.255.0

LAN interface Ethernet 1 (ETH 1)

192.168.1.1

255.255.255.0

 

 

 

If these addresses match with those of your network, go to section “3. Connecting the IpLink to the network” on page 31. Otherwise, refer to the following sections to change the addresses and network masks.

Login

To access the OnSite, start the Telnet application. Type the default IP address for the router into the address field: 192.168.200.10. Accessing your OnSite via a Telnet session displays the login screen. Type the factory default login: admin and password: <blank>.

2. Configuring the desired IP address

30

Page 30
Image 30
Patton electronic 2884 Configuring the desired IP address, Connecting and logging in via the Console port, Login

2884 specifications

The Patton Electronic 2884 is a powerful and versatile networking solution designed to facilitate efficient data communication and enhance connectivity in various environments. Known for its reliability and performance, the 2884 is especially favored in enterprise applications, remote locations, and industrial settings.

One of the standout features of the Patton 2884 is its ability to support a wide array of communication protocols. This flexibility allows it to seamlessly integrate into various network architectures, making it an ideal choice for businesses looking to streamline their connectivity infrastructure. Equipped with advanced Ethernet and serial connectivity options, the device can handle multiple data types and formats, ensuring consistency and efficiency in data transmission.

The 2884 is built with robust technologies that enhance its overall performance. With support for both T1 and E1 circuits, the device is capable of delivering high-speed data transfers while reducing latency, which is crucial for applications that require real-time data access. Additionally, the unit employs sophisticated error correction and data compression techniques to optimize the throughput while maintaining data integrity.

In terms of security, the Patton 2884 offers advanced features that protect sensitive data during transmission. The encryption capabilities ensure that information remains confidential as it traverses potentially unsecured networks, which is critical in today’s environment of increasing cyber threats. The device also supports multiple authentication methods to verify authorized users, further safeguarding the network.

The design of the Patton 2884 emphasizes ease of use and management. It comes equipped with a user-friendly interface, enabling administrators to configure and monitor the device with minimal effort. The advanced diagnostic features allow for quick troubleshooting, reducing downtime and ensuring that networks operate smoothly.

Another important characteristic of the Patton 2884 is its rugged construction, which makes it suitable for deployment in harsh environments. Its durability ensures that the device can withstand extreme temperatures and physical shocks, a key consideration for installations in industrial sites or outdoor settings.

In conclusion, the Patton Electronic 2884 stands out as a reliable, flexible, and secure choice for organizations seeking to enhance their networking capabilities. With its advanced features and robust design, it is equipped to meet the demands of modern data communication, making it a valuable asset for any organization.