Patton electronic 3P-MF, 3P-MF9

1.0 WARRANTY INFORMATION

Patton Electronics

warrants all Model 3P-MF Series components to be

free from defects, and will—at our option—repair or replace the product

should it fail within one year from the ﬁrst date of shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modiﬁcation. If this

product fails or does not perform as warranted, your sole recourse shall

be repair or replacement as described above. Under no condition shall

Patton Electronics

be liable for any damages incurred by the use of this

product. These damages include, but are not limited to, the following: lost

proﬁts, lost savings and incidental or consequential damages arising

from the use of or inability to use this product.

Patton Electronics

spe-

ciﬁcally disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

1.1 RADIO AND TV INTERFERENCE

The Models 3P-MF and 3P-MF9 generate and use radio frequency

energy, and if not installed and used properly—that is, in strict accor-

dance with the manufacturer's instructions—may cause interference to

radio and television reception. The Models 3P-MF and 3P-MF9 have

been tested and found to comply with the limits for a Class A computing

device in accordance with the speciﬁcations in Subpart J of Part 15 of

FCC rules, which are designed to provide reasonable protection from

such interference in a commercial installation. However, there is no guar-

antee that interference will not occur in a particular installation. If the

Model 3P-MF or 3P-MF9 do cause interference to radio or television

reception, which can be determined by turning the power off or discon-

necting the RS-232 interface, the user is encouraged to try to correct the

interference by one of the following measures: moving the computing

equipment away from the receiver, re-orienting the receiving antenna

and/or plugging the receiving equipment into a different AC outlet (such

that the computing equipment and receiver are on different branches).

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is

in compliance with the Electromagnetic Compatibility (EMC) directive

and the Low Voltage Directive (LVD) of the Union European (EU). A Cer-

tiﬁcate of Compliance is available by contacting Patton Technical Sup-

port.