Patton electronic 3P-MF, 3P-MF9 , just plug it in!, underpowered,

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This

product has been thoroughly inspected and tested and is warranted for

One Year parts and labor. If any questions or problems arise during

installation or use of this product, please do not hesitate to contact Pat-

ton Electronics Technical Support at

(301) 975-1007

2.1 FEATURES

• Solves low power interface problems

• Provides power to any Patton self-powered short-range modem

• Supplies 9 VDC to pin 9 (DB-25 and DB-9)

• DB-25 male to DB-25 female connectors (Model 3P-MF)

• DB-9 male to DB-25 female connectors (Model 3P-MF9)

• LED indicator shows power status

• 120 or 230 VAC versions available

• Very thin case (0.7 in./1.8 cm) for closely spaced computer ports

• Nothing to conﬁgure—

just plug it in!

2.2 DESCRIPTION

The Model 3P-MF Series

power supply adapters let you use any Patton

self powered short haul with an

underpowered

EIA-232 or EIA-574 inter-

face. Many laptops, notebooks and PC cards on the market supply inter-

face that’s well below the speciﬁcations of the actual standard. The

Models 3P-MF (DB-25 connectors) and 3P-MF9 (DB-9 connectors) can

easily bridge that gap. Special versions also available.

Model 3P-MF is equipped with DB-25 connectors on each end; Model

3P-MF9 has DB-9 connectors. Each provides 9VDC to Patton’s interface

powered short hauls on pin 9. And both 120 VAC and 230 VAC wall-

mount adapter versions are available.