Loading Labels for Hot - Hold Items
1. Remove and discard the tape from a new roll of labels.
2. Press the cover release buttons (on both sides of the printer) towards the front of the printer. Lift open the cover.
3. Adjust the supply guides to their widest position by turning the dial.
4. Open the supply holders to their widest position by pushing out the supply holder tabs.
5. Load the supply roll.
6. Press the supply under the supply guides and adjust the supply guides so they just touch the edges of the backing paper.
7. Open the peel bar cover by pushing down.
Peel Bar
Cover
Print Mode
Switch
8. Change print modes to peel by switching the print mode switch to the (1) position.
1=Peel Mode
9. Remove the first two labels from the backing paper.
