C7. wid mag Width magnifier, 1-7 (times) Proportionally spaced fonts do
not have a set width. To estimate the size of your field, use
the letter "W" for the widest field or an "L" for an average
width field.
C8. color Options for standard printer fonts:
BOpaque, Normal, Black, Normal
DOpaque, Normal, White, Normal
OTransparent, Normal, Black, Normal
RTransparent, Normal, White, Normal
WOpaque, Normal, White, Normal
NOTE: Solid black print should not exceed 30% on a given
square inch of the label, or the printhead life may be
decreased.
There are two types of field col or overlay attributes:
Transparent The overlay field (text or consta nt text) does
not block out (or "erase") existin g fields.
Opaque The overlay field blocks out (or "erases")
existing fields.
Field placement in the packet is an important consideration
when using field color attribute s. If a line field is defined
before the overlay (text or con stant text) field, the line field is
blocked out by the overlay field , depending on the overlay
field’s color attribute. If a line field is defined after the overlay
field, the line field is not blocked out by the overlay field,
regardless of the overlay field’s co lor attribute.
C9. alignment Alignment of constan t text in the field. Options:
LAlign on left side of field.
CCenter text within field (for monospaced fonts only)
RAlign on right side of field (for monospaced fonts only)
BAlign at midpoint of field
EAlign at end of field.
Use L, B, or E for any font.
C10. char rot Character rotation. Options:
0Top of character points to top of field
1Top of character points to left of field
2Top of character points to bottom of field
3Top of character points to right of field
3-14 Defining Fields