L5. angle/end rowIf Using Segments:
Row location of ending point. Measure from bottom of print
area. Ranges same as row above. On horizontal lines, this
value must match item L3.
If Using Vector s:
Angle of line. Options: 0, 90,
180, or 270.
L6. length/end colIf Using Segments:
Column location of end point. Mea sure from left edge of print
area. Ranges same as column above. On vertical lines, this
value must match parameter L4.
If Using Vector s:
Length of the line in selected units.
Ranges for horizontal lines:
English 0 - 200
Metric 0 - 508
Dots 0 - 384
Ranges for vertical lines:
English 0 - 400
Metric 0 - 1016
Dots 0 - 768
L7. thickness Using the chart below for reference, write the line thickness
(1 to 99) in box L7. Measured in dots.
NOTE: Line thickness fills upward on horizontal lines, or to
the right on vertical lines.
Defining Fields 3-17