Peavey 100 EFX FFoooottsswwiittcchh

PRESET PRESET PRESET

MODULATION

CHANNEL

DELAY

REVERB

PFC 3

DOUBLE-CLICK

TO STORE PRESET

EFX

SELECT

MODE

28 30 31 32 33 34 3529

MMOODDEESSEELLEECCTT

The PFC 3 footswitch operates in two modes: EFX Select mode and Preset Select mode. Pressing

the MODE SWITCH (28) selects between the two modes. The active mode is indicated by the

MODE LED (29). Illumination of the LED indicates EFX Select Mode; a dark LED indicates Preset

Select Mode. Controls and indicators 30-35 perform different functions relative to the active

mode.

PPRREESSEETTSSEELLEECCTTMMOODDEE

In this mode, all three switches control effects presets. Their corresponding LEDs indicate which

preset is active. Once desired settings are achieved utilizing the effects controls on the front

panel, ddoouubbllee--cclliicckk oonnee ooff tthhee PPrreesseett sswwiittcchheess ((3300,, 3333,, oorr 3355)) ttoo ssttoorree tthhee sseettttiinnggss..To return to the

last saved settings for a Preset, press the desired Preset switch once.

For a detailed explanation on creating and storing presets, refer to the TWEAK F EATURES section

of this manual on the following page.

EEFFXXSSEELLEECCTTMMOODDEE

NNOOTTEE::When entering this mode, the current preset will remain active. In this mode, SWITCH 1

(30) selects between the Lead and Clean channels. The CHANNEL LED (31) will illuminate when

the Lead channel is active. SWITCH 2 (33) toggles between two effects and their respective

settings. This switch may be used as an on/off switch if one of the settings has no effects active.

To use the MODULATION LED (32) as a status indicator, the “off” (or lower setting) should be

made with the LED dark, and the “on” (or higher setting) made with the LED illuminated. SWITCH

3 (35) toggles between two reverb and delay settings. As with effects settings, this switch may be

used as an on/off for reverb and delay. Both functions change simultaneously when this switch is

depressed.

FFoooottsswwiittcchh