Peavey 3G specifications Specifications

Models: 3G

1 4
Download 4 pages 19.67 Kb
Page 1
Image 1

SPECSP E A V E Y E L E C T R O N I C S

SP3G

Sound Reinforcement Enclosure with Sound GuardHF Protection System

SPECIFICATIONS

Frequency Response, 1 Meter

On-Axis, Swept-Sine in Anechoic

Environment:

54 Hz to 17 kHz

Low-Frequency Cut-Off (-3 dB point):

54 Hz

Usable Low-Frequency Limit (-10 dB point):

47 Hz

Power Handling:

Full-Range:

350 W continuous (52.9V RMS)

700 W program

1,400 W peak

Bi-amp Low:

350 W continuous (52.9 V RMS)

700 W program

1,400 W peak

Bi-amp High:

150 W continuous (34.6 V RMS)

300 W program

600 W peak

Sound Pressure Level, 1 Watt, 1 Meter in Anechoic Environment:

Full-Range:

99 dB (2.8 V)

Bi-amp Low:

100 dB (2.8 V)

Bi-amp High:

99 dB (2.8 V)

Maximum Sound Pressure Level (1 meter):

Full-Range:

125 dB continuous

131 dB peak

Bi-amp Low:

126 dB continuous

132 dB peak

Bi-amp High:

120 dB continuous

127 dB peak

Radiation Angle Measured at -6 dB Point of Polar Response:

500 Hz to 1.6 kHz: Horizontal: 122° ±-15°Vertical: 152° ±-38°

1.6kHz to 5 kHz: Horizontal: 79° ±21° Vertical: 83° ±22°

5kHz to 16 kHz: Horizontal: 87° ±10° Vertical: 45° ±4°

Directivity Factor, Q (Mean):

8 ±4.3

Directivity Index, Di (Mean):

8.3 dB ±2.8 dB

Transducer Complement:

1505-8 KADT Black Widow® woofer 6.5" Pro mid-range driver

22XT compression driver

Box Tuning Frequency:

58 Hz

Crossover Frequency (internal passive):

800 Hz

Minimum Recommended Active Crossover Frequency and Slope for Bi-amping:

800 Hz at 18 dB/octave

Time Offset:

0.14 mS (delay Lows)

Impedance (Z):

Full-Range Nominal:

8 Ω

Full-Range Minimum:

5.3 Ω

Lows Nominal:

8 Ω

Highs Nominal:

8 Ω

Input Connections:

Two paralleled 1/4" phone jacks for full-range

One 1/4" phone jack for bi-amp low One 1/4" phone jack for high and mid bi-

amp

Enclosure Materials & Finish:

3/4" plywood enclosure covered with black carpet and protective polymer corners

Expanded metal grille to protect the mid and low drivers

Mounting Provisions:

One SA-1 stand mount on bottom of enclosure.

Dimensions (H x W x D):

33.50" x 21.50" x 22.50"

(85.1 cm x 54.6 cm x 57.1 cm) Rear width 14.25" (36.1 cm)

®

Page 1
Image 1
Peavey 3G specifications Specifications