Peavey 9/0180305014, 112/212 EFX operation manual Especificaciones DEL EFX

ESPECIFICACIONES DEL EFX 112

Power Amplifier Section:

Power measured with T. Dynamics® @ 100% (5% THD, 1 kHz, 120 VAC line)

Rated Power and Load:

65 W RMS into 8 Ohms

Frequency Response:

+3, -0 dB 100 Hz to 20 kHz @ 50 W RMS into 8 Ohms

Hum and Noise:

Greater than 90 dB below rated power

Power Consumption:

Domestic: 200 W @ 60 Hz, 120 VAC

Export: 200 W @ 50/60 Hz, 220-230 VAC

Preamp Section:

Preamp specs measured a 1 kHz with controls preset as follows:

Channel Select - Clean

Clean Mode Switch - Modern

Low and High EQ - 10

Mid EQ - 0

Lead Pre and Post Gain - 10

Lead Mode Switch - Vintage

Effects - Off

Nominal Levels - Clean Volume @ 5

Minimum Levels - Clean Volume @ 10

Preamp High Gain Input:

Impedance: High Z, 250 k Ohms

Nominal Input Level: -12.6 dBV, 234 mV RMS

Minimum Input Level: -23 dBV, 70 mV RMS

Maximum Input Level: 0 dBV, 1 V RMS

Effects Send:

Load Impedance: 1 k Ohms or greater

Nominal Output Level:

Effects Level: -8.4 dBV, 380 mV RMS

Effects Return:

Impedance: High Z, 22 k Ohms Designed Input Level:

Effects Level: -8.4 dBV, 380 mV RMS (Switching jack provides Effects Send to Effects Return connection when not used.)

System Hum and Noise @ Nominal Input Level:

(20 Hz to 20 kHz unweighted) Greater than 76 dB below rated power

Equalization:

Clean Channel:

Special Low, Mid, and High passive EQ Modern/Vintage Switch: Two distinct EQ voicings

Lead Channel:

Low, Mid, and High passive EQ Vintage/Modern/High Gain Switch: Three different EQ

and Gain voicings Presence fixed: 2 dB @ 7 kHz

Resonance fixed: 3 dB @ resonant frequency of cabinet

External Footswitch Functions:

Channel select; effects control

Dimensions:

18” H x 21.5” W x 10.75” D

(457 mm H x 546 mm W x 273 mm D)

Weight:

34.5 lbs. (16 kg)

Features and specifications subject to change without notice.

22