212 EFX SPECIFICATIONS
Power Amplifier Section:
Power measured with T. Dynamics® @ 100% (5% THD, 1 kHz, 120 VAC line)
Rated Power and Load:
80 W RMS into 8 Ohms
100 W RMS into 4 Ohms
Frequency Response:
+0,
Hum and Noise:
Greater than 90 dB below rated power
Power Consumption:
Domestic: 300 W @ 60 Hz, 120 VAC
Export: 300 W @ 50/60 Hz,
Preamp Section:
Preamp specs measured @ 1 kHz with controls preset as follows:
Channel Select – Clean
Clean Mode Switch – Modern
Low and High EQ – 10
Mid EQ – 0
Lead Pre and Post Gain – 10
Lead Mode Switch – Vintage
Effects – Off
Nominal Levels – Clean Volume @ 5
Minimum Levels – Clean Volume @ 10
Preamp High Gain Input:
Impedance: High Z, 250 k Ohms
Nominal Input Level:
Minimum Input Level:
Maximum Input Level: 0 dBV, 1 V RMS
Preamp Low Gain Input:
Impedance: High Z, 44 k Ohms
Nominal Input Level:
Minimum Input Level:
Maximum Input Level: +6 dBV, 2 V RMS
Effects Send:
Load Impedance: 1 k Ohms or greater Nominal Output Level:
Effects Level Switch “Out”:
Effects Level Switch “In”: 0 dBV, 1 V RMS
Effects Return:
Impedance: High Z, 22 k Ohms
Effects Level Switch “Out”:
Effects Level Switch “In”: 0 dBV, 1 V RMS
Preamp Output:
Load Impedance: 1 k Ohms or greater
Nominal Output Level: 0 dBV, 1 V RMS
Power Amp Input:
Impedance: High Z, 22 k Ohms
System Hum and Noise @ Nominal Input Level:
(20 Hz to 20 kHz unweighted) Greater than 78 dB below rated power
Equalization:
Clean Channel:
Special Low, Mid, and High passive EQ Modern/Vintage Switch: Two distinct EQ and
Gain voicings
Lead Channel:
Low, Mid, and High passive EQ Vintage/Modern/High Gain Switch: Three different
EQ voicings
Presence:
+6 dB @ 5 kHz
Resonance:
+ 6 dB @ resonant frequency of cabinet
External Footswitch Functions:
Channel select; effects control
Dimensions:
20.75" H x 26.75" W x 11.63" D
(527 mm H x 679 mm W x 295 mm D)
Weight:
54.3 lbs. (25 kg)
42
