Peavey A/A-8P specifications Description, Input, S P E C I F I C A T I O N S, Eight-Channel

S P E C I F I C A T I O N S

		A/A-8P™
		Eight-Channel
	Preamp
				Phantom Power:	DESCRIPTION
				+48 volts defeatable each channel via	The Peavey Architectural Acoustics
				dipswitch. High level line setting will
					A/A-8P™Preamp is a high quality mic/
				override defeat switch and shut off	line preamp with eight separate
				phantom to channel.
					transformer balanced inputs. Each
	SPECIFICATIONS			Dimensions:	channel provides a level control with a
				1.75" (H) x 19" (W) x 11" (D)	selectable mic or line inputs to
				Weight:	accomodate a wide range of input
Inputs:					levels.
				8.6 lbs
		Euro type connector, balanced low or high		Color:	The A/A-8P™front panel provides
			impedance		immediate indication of signal status
Outputs:				Gray	with an activity and clip LED. Included
				Power Consumption:	in each channel's signal path is a level
		Euro type connector, balanced low
					limiter which is preset at the optimum
			impedance 100 ohms	120 V AC, 60 Hz, 20 W
					input level for the MM-8840 and
Output Level:
				INPUT	MM-8830 Digital Interface. Also, each
		+15 dBu with Limiter activated (rated)			channel provides industry standard
		+26 dBu maximum			+48 volts phantom power. Both the
				Mic Setting (low level):
Controls:					limiter and phantom power are user
				Frequency Response: 20 Hz to 30 kHz
		8-input gain controls (tamper resistant,			enabled on a per channel basis with
				(±1.5 dB)
			flush-mount, screwdriver slotted)		convenient dip switches located on the
				Maximum Gain: 65 dB at "max" setting
					back panel. The inputs and outputs are
Noise:				Maximum Input Level: 160 mV (-14 dBu)
					"Euro" type connectors. And, to reduce
				Minimum Gain: 28 dB at "min" setting
		-75 dB below full output
				Minimum Input Level for Full Output:	unauthorized or accidental level
THD:				2 mV (-52 dBu)	changes, we have provided tamper
		Less than 0.02% at 1 kHz signal input		Input Impedance: 2 K ohms	resistant level controls that are installer
Activity LED:				E.I.N.: 125 dBV (150 ohms, 65 dB gain)	adjustable with a screw driver.
				Line Setting (high level):	The A/A-8P is ruggedly packaged in
		Activated at or above 77 mV (-20 dBu)
				Phantom power automatically defeated	an industry standard 19" single rack
Clip LED:				Maximum Gain: 28 dB	space unit.
		Activated at or above 4.4 volts (+15 dBu)		Maximum Input for Rated Output:
				14.8 volts (+26 dBu)
Limiter Threshold:				Minimum Gain: -10 dB attenuation of
		+15 dBu		input signal
				Minimum Input Level for Rated Output:
				172 mV (-13 dBu)
				Input Impedance: 20 K ohms	®

ARCHITECTURAL ACOUSTICS® TM®