Peavey A/A-8P specifications Architectural & Engineering Specifications, Limited Warranty

ARCHITECTURAL &

ENGINEERING

SPECIFICATIONS

The Peavey Architectural Acoustics A/A-8P Mic Preamp shall have eight channels with transformer balanced inputs. The outputs will be electronically balanced. Signal inputs shall be selectable for either low level (mic) or high level (line) signals. Phantom power will be available for each channel with a

defeat switch per channel located on the rear panel. Channel level controls shall be mounted on the front panel and will be flush-mount, tamper resistant, screwdriver slotted. Two signal status indicators per channel will be located on the front panel: a green signal present LED and a red clip LED. There shall be a level limiter per channel, defeatable by a switch located on the rear panel. The output threshold of this limiter shall

be optimized for input to the MediaMatrix MM-8840 and MM-8830. The connection to the A/A-8P Preamp input and output shall be via "Euro" type connectors. The power on LED shall be located on the front panel. The unit shall be 1-3/4" high using industry standard 19" rack spacing. The weight of the unit shall be 8.6 lbs. The unit shall be a Peavey Architectural Acous- tics Division model A/A-8P™.

Back Panel

LIMITED WARRANTY

Peavey Electronics Corporation warrants to the original purchaser of this new Architectural Acoustics product that it is free from defects in material and workmanship. If within one (1) year from date of purchase a properly installed product proves to be defective and Peavey is notified, Peavey will repair or replace it at no charge. (Note: Batteries and patch cords not covered.) “Original pur chaser” means the customer for whom the product is originally installed.

Damage resulting from improper installation, interconnection of a unit or system of another manufacturer, accident or unreasonable use, neglect or any other cause not arising from defects in material and workmanship is not covered by this warranty. The warranty is valid only as to products purchased and installed in the United States and Canada.

THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. UNDER NO CIRCUMSTANCES WILL PEAVEY BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THIS LIMITED WARRANTY IS THE ONLY EXPRESSED WARRANTY ON THIS PRODUCT, AND NO OTHER STATEMENT, REPRESENTATION, WAR- RANTY, OR AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING UPON PEAVEY.

Peavey’s liability to the original purchaser for damages for any cause whatsoever and regardless of the form of action is limited to the actual damages up to the greater of Five Hundred Dollars ($500) or an amount equal to the purchase price of the product that caused the damage or that is the subject of or is directly related to the cause of action. This limitation of liability will not apply to claims for personal injury or damage to real property or tangible personal property allegedly caused by Peavey’s negligence. For information on service under this warranty, call a Peavey customer service representative at (601) 483-5376.

®

ARCHITECTURAL ACOUSTICS®

Features and specifications subject to change without notice.

	A Division of Peavey Electronics Corporation
	711 A Street / Meridian, MS 39301 / U.S.A./ (601) 483-5376 /	Fax (601) 486-1154	TM®
©1995	#80302356		Printed U.S.A. 6/96