AWARNING!
For optimum performance and reliability DO NOT PRESENT THE AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN 2 OHMS, OR A COMBINATION OF SPEAKERS THAT TOGETHER ARE LESS THAN 2 OHMS!
Using one speaker, it must be rated at 2 ohms minimum.
Using two speakers, they must be rated each at 4 ohms minimum.
Using three speakers, they must be rated each at 8 ohms minimum.
The
The new extended specs are:
630 W RMS into 4 ohms / 900 W RMS into 2 ohms (per channel) 1260 W RMS into 8 ohms / 1800 W RMS into 4 ohms (bridged) DDTTM compression with LED indicators and defeat switch Slew Rate: 40 V/microsecond, stereo mode, each channel Power Bandwidth: 10 Hz to 50 kHz @ 4 ohms, rated power Total Harmonic Distortion: less than 0.03%, rated power
Hum and Noise: 100 dB below rated power, unweighted
All the current features of the previous units have been retained, including Peavey’s patented DDTTM compression system and the very flexible
FEATURES
Separate power transformers and circuit breakers for each channel
Automatic
Independent channel thermal/fault protection
Two
Two
Single XLR and dual phone plug inputs each channel
XLR input can be
Dual phone plug and
High temperature shutdown LED each channel
DDTTM activation LED each channel
Calibrated/detented input attenuator control each channel
Rear panel DDTTM defeat and bridge mode select slide switches
3