Operating Instructions
This dryer is equipped with an appliance leakage circuit interrupter (ALCI) for your safety. This device is designed to make the appliance inoperable under some abnormal conditions (such as accidental immersion in water).
After the appliance is plugged in, you must check your protective device as follows:
1.Press the “Reset” button on the ALCI device.
2.Press the “Test” button. The “Reset” button will pop out. This verifies that the protective device is working properly.
3.Press the “Reset” button once more to reactivate the safety device and use your appliance.
REPEAT THE ABOVE PROCEDURE BEFORE EACH USE
TO CONFIRM THAT THE PROTECTIVE DEVICE IS OPERATING.
Features of Your Hair Dryer
Cord Retract
Button
Air Outlet
Air Intake
Grill
Cool Shot
Button
Hanging Ring /
Cord Guard
Off/Low/High
Switch
Retractable Cord push cord retract button and hold electrical plug as it retracts
