Peavey E20 manual Rear Panel, IEC Mains Connector

Rear Panel

10 11

10

11

POWER SWITCH

On/Off switch. The red pilot light illuminates when the unit is turned on.

IEC MAINS CONNECTOR

This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings for the intended operating voltage is included in the carton. The mains cord should be connected to the amplifier before connecting to a suitable AC outlet.

U.S. Domestic AC Mains Cord

The mains cord supplied with the unit is a heavy-duty, three conductor type with a conventional 120VAC plug with ground pin. If the outlet used does not have a ground pin, a suitable adapter should be used and the third wire grounded properly. All apparatus with class 1 construction shall be connected to a mains socket with a protective earthing connection.

Never break off the grounding pin on any equipment. It is provided for your safety. The use of extension cords should be avoided but, if necessary, always use a three wire type. Always use a qualified electrician to install any electrical equipment. To prevent the risk of shock or fire hazard, always be sure the amplifier and all associated equipment is properly grounded.

NOTE: For UK Only

If the colors of the wires in the mains lead of this unit do not correspond with the colored markings identifying the terminals in your plug, proceed as follows: (1) The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E, the earth symbol, colored green or green and yellow. (2) The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black. (3) The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red.

18