Peavey JSX Joe Satriani Signature All-Tube Amplifier manual O T S W I T C H, Cable Connector

F O O T S W I T C H

34

35 36 37

(34)CABLE CONNECTOR

This seven-pin DIN connector is provided for connecting the footswitch to the amplifier REMOTE SWITCH (25) via the cable included in the carton. Connections at the switch and the amplifier should be made before the amp is powered up.

(35)ULTRA/CRUNCH SELECTOR

This switch selects between the Ultra and Crunch channels on the amplifier. The adjacent LED will illuminate when the Ultra channel is selected. When the LED is dark, the Crunch channel is selected. The CLEAN SELECTOR (36) must be in the BYPASS mode to activate either the Ultra or Crunch channel.

(36)CLEAN SELECTOR

This switch selects the Clean channel and will activate regardless of the position of the ULTRA/CRUNCH SELECTOR (35). The adjacent LED will illuminate when the Clean channel is selected. This switch must be in the BYPASS position, indicated by a dark LED, in order to utilize the ULTRA/CRUNCH SELECTOR (35).

(37)EFFECTS SELECTOR

This switch activates the amplifier’s effects loop (21 – 24). The adjacent LED will illuminate when the effects loop is active.

9