Sanyo PLC-XTC50AL owner manual 0USB Connector Series B, 1R/C Jack

Part Names and Functions

Side Terminal

!0 !1 !2 !3

!0USB CONNECTOR (Series B)

Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of your computer to this connector with the supplied USB cable (p.20).

!1R/C JACK

When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied).

!2VIDEO INPUT JACK

Connect the composite video output signal from video equipment to this jack (p.21).

!3CONTROL PORT CONNECTOR

When controlling the projector with RC-232C, connect the control equipment to this connector with the serial control cable.

12