Sanyo PLC-XTC50AL owner manual Shutter button, Timer button, Keystone button

Basic Operation

SHUTTER button Remote Control

See pages 28 and 57 for details.

P-TIMER
button	KEYSTONE
	button
	SHUTTER
	button

P-TIMER button

Press the P-TIMER button on the remote control. The P-Timer display “00:00” appears on the screen and the countdown starts (00:00–59:59).

To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again.

✔Note:

•See the previous page for the description of other buttons.

P-Timer display

KEYSTONE button

Press the KEYSTONE button on the remote control. The “Keystone” appears on the screen.

Use the Point ed7 8 buttons to correct keystone distortion. The keystone adjustment can be stored (p.45).

•The white arrows indicate that there is no correction.

•A red arrow indicates the direction of correction.

•An arrow disappears at the maximum correction.

•If you press the KEYSTONE button on the remote control again while the Keystone dialog box is being displayed, the keystone adjustment will be canceled.

•The adjustable range can be limited depending on the input signal.

• “Keystone” disappears after 10 seconds.

Reduce the upper width	Reduce the lower width	Reduce the left part with
with the Point e button.	with the Point d button.
		Point 7 button.

Reduce the right part with Point 8 button.

31