Sanyo PLC-XTC50AL owner manual If the Filter counter reached a time set in the timer

Appendix

The projector is detecting abnormal condition..

		Indicators				Projector Condition
POWER		WARNING WARNING		SHUTTER	LAMP 1/2
green / red		TEMP.	FILTER	blue	REP.
		red	orange		yellow
✽		✽		✽	✽	If the Filter counter reached a time set in the timer
						setting, a Filter replacement icon (Fig.2) appears on the
						screen and the WARNING FILTER indicator on the top
						panel lights up. Replace the filter as soon as possible. If
						the filter is out of scroll and the projector reaches a time
						set in the timer setting, Fig. 3 appears on the screen
Fig..2	Filter replacement icon					and the WARNING FILTER indicator lights up. Replace
						the filter cartridge as soon as possible.
						If the filter is clogged and no scroll is left in the filter
						cartridge, a Filter cartridge replacement icon (Fig.4)
Fig..3						appears on the screen and the WARNING FILTER
						indicator lights up. Replace the filter cartridge as soon as
						possible.
Fig..4	Filter cartridge replacement icon					✔Note:
						•Fig.2, Fig.3 and Fig.4 icon will not appear when the Display
						function is set to “Off” (p.55), or during “Freeze” (p.30).
						The filter cartridge is not installed in the projector. Check
				✽	✽	the filter compartment to see if the filter cartridge is
						installed in the projector.
						The projector detects an abnormal condition during filter
green		✽		✽	✽	scroll.
		✽				The projection is being cooled down after detecting an
red				✽	✽	abnormal condition during filter scroll.
						The projector has been cooled down enough and is in
		✽		✽	✽	the stand-by mode after detecting an abnormal condition
red						during filter scroll
						The projector detects an abnormal condition and cannot
						be turned on. Unplug the AC power cord and plug it
						again to turn on the projector. If the projector is turned
			✽	✽	✽	off again, unplug the AC power cord and contact the
						dealer or the service center. Do not leave the projector
						on. It may cause an electric shock or a fire hazard.
✽		✽	✽		✽	The shutter is out of control.
		✽			✽	The shutter is out of control. (The projector is in the
red						cooling mode.)
						The shutter is out of control. (The projector is in the
		✽			✽	stand-by mode.) In that case, contact the service station
red						immediately.

76