Peavey JSXTM Mini ColossalTM Class A Tube Guitar Amplifier manual Features

ENGLISH

AMPLIFIER

The JSX Mini Colossal Combo is a Class A monster in a nice, little box. It has what I always wished a small vintage amp would have; a pure, wide-open sound, classic tremolo, buffered effects loop, a unique power level attenuator, and a recording output that actually sounds like the amp. Together with a specially voiced 8” speaker, the 5 watt Mini Colossal has a vintage tone that really rocks. It can run clean, crunchy, or, down and dirty. Its unique design makes it easy to get a good tone fast, and its size makes it very practical. Whether practicing, recording, or, even playing a small gig, this lively little amp really sounds great.

Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC line voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit. Each product feature is numbered. Refer to the front panel diagram in this manual to locate the particular features next to its number.

Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.

FEATURES:

•Single Input

•1 x 12AX7 and 1 x EL84 tube

•Pure Class A operation

•No negative power amp feedback

•Preamp Volume and Tone controls

•5W (rms) into 4, 8, or 16 Ohms (selectable impedance)

•Power Sponge™ output power level attenuator

•Buffered Effects Loop Send and Return jacks

•Classic opto-electronic Tremolo circuit

•Microphone Simulated XLR Recording Output

•XLR Ground Lift switch

•Specially voiced 8” C8R-type speaker

•Classic jeweled pilot light

•Chrome plated brass control knobs

VENTILATION: For proper ventilation, allow 24" clearance from nearest combustible surface.