43General Radio Features Operation (cont.)
Conventional Telephone Operation (cont.)
Making an Immediate Access Telephone Call Using the Keypad (MTS 2000 III Model Only)
1.To make an immediate access call using the
keypad, press the right arrow key ( 
) until “PHON” appears on the display.
Note: If your radio has been so programmed, you can press the phone button for quick access to the telephone call feature. This will take you directly to the “PLEASE WAIT” display shown in step 2; skip to step 3.
2.Press the key below “PHON.” The display shows “PLEASE WAIT” while your radio attempts to access the telephone system.
Note: This is a timed message. If you cannot access the telephone system (no dial tone heard), you will have to press the HOME key or the phone button to hang up, and start again at step 1 of this procedure.
3.If the access was successful, you will hear a dial tone. The display will show the last number dialed.
The new telephone number can now be entered from the keypad, using any of the numeric (0 – 9) keys, as well as the “*” and “#” keys. You can also enter a pause in the telephone number by first pressing the “*” key, then the “#” key. The pause will be shown on the display as a “P.”
4.Enter the telephone number. The display changes to show the numbers as they are being entered. The cursor will flash to indicate the location of the next digit to be entered. When the maximum number of digits have been entered (buffered dial only), the cursor will disappear.
1 | 2 A B C | 3 D E F |
4 G H I | 5 JKL | 6MNO |
7P R S 8TUV 9 W X Y
0
HOME
1 | 2 A B C | 3 D E F |
4 G H I | 5 JKL | 6MNO |
7P R S 8TUV 9 W X Y
0
HOME
