38General Radio Features Operation (cont.)
HOME
1 | 2 A B C | 3 D E F |
4 G H I | 5 JKL | 6MNO |
7P R S | 8TUV | 9 W X Y |
| 0 |
|
| HOME |
|
Programming the Radio’s Lists (cont.)
6.Press the “select” key (programmable via the RSS) to enter the
– 9) keys. The blinking cursor indicates the position of the next number to be added.
Note: In this mode, the left arrow key ( 
) will function as a backspace key. Pressing this key will erase the previous digit, and the cursor will move to the left. When the last digit on the display has been erased, another press of this key or the right arrow key ( 
) will cause you to leave the number- edit mode without making any changes, and reenter this procedure at step 5.
7.To change the radio ID number, use the left arrow key to erase the existing ID number’s digits. Then, enter the new digits. The display shows the digits as they are being entered; the cursor flashes to indicate the location of the next digit to be entered. When the maximum number of digits have been entered, the cursor will disappear. If you try to add any more digits, you will hear an invalid (bad) keypress alert tone.
8.When you have finished changing the ID number, press the select key again; the change is saved in the radio’s memory and you are returned to step 5. The display will again alternate between showing the member’s name and radio ID number; you can change additional numbers from this point.
9.When you have finished making changes, press the HOME key to exit the program mode. The radio will return to the home display.
