Motorola III operating instructions B C E F Jkl

97Trunked Radio Features Operation (cont.)

Call Alert Page Operation (cont.)

Answering a Call Alert Page With a Private

Conversation II Call (800 MHz Only)

1. When a Call Alert page is being received, you will hear a recurring four-beep tone until the call is answered or the radio is reset. The display will alternate between showing the current talkgroup and “PAGE RECEIVED.” The green LED and the call received status annunciator will flash to indicate that a page is being received.

Note: Any button press, keypad press, or mode change (except for the light button or volume control) will turn the Call Alert audible and visual indicators off.

2. Press the call response button or the call button (both programmed via the RSS), or press the right arrow key until the display shows “CALL,” then press the key below “CALL.” The display will show the ID number of the radio that paged you.

3.Press the PTT switch to transmit the ID number. The ID number of the calling radio is stored as the “last ID number received.”

4a. If the party you are calling does not answer the

call, go to step 6 of this procedure to hang up.

or

4b. If the party you are calling does answer the call, you will hear his/her voice.

5.Press the PTT switch to carry on a Private Conversation with the called person.

6. When you have finished your conversation, or if the radio you are calling does not answer, press the HOME key or the page button to hang up. The radio will return to the home display.

1	2 A B C	3 D E F
4 G H I	5 JKL	6MNO
7P R S	8TUV	9 W X Y
	0
	HOME