39General Radio Features Operation (cont.)

Conventional Telephone Operation

The conventional telephone feature allows you to use your conventional radio similar to a standard telephone. To make a call through the telephone system, your radio must send access and hangup codes to the system. Unless otherwise indicated, the conventional telephone sections in this manual assume that the access and hangup codes have been programmed into the radio by the RSS. These codes will then be automatically transmitted.

When you are dialing from the keypad (MTS 2000

IIImodel only), your radio may be programmed with either buffered dial (you enter all digits and press the PTT before the digits are sent out) or live dial (each digit is sent out as it is pressed).

Calling the Last Number Dialed

1.To send a telephone call to the last number dialed,

press the right arrow key ( ) until “PHON” appears on the display.

Note: If your radio has been so programmed, you can press the phone button for quick access to the telephone call feature. This will take you directly to the ”last number dialed” display shown in step 2; skip to step 3.

2.Press the key below “PHON.” The display changes to show the last telephone number dialed. At this point, either:

3a. If your radio is programmed for immediate access, the display shows “PLEASE WAIT” while your radio attempts to access the telephone system. Go to step 4.

Note: This is a timed message. If you cannot access the telephone system (no dial tone heard), you will have to press the HOME key to hang up, and start again at step 1 of this procedure.

or

3b. If your radio is programmed for delayed access, the display does not change. Press the PTT switch. The display shows “PLEASE WAIT” while your radio attempts to access the telephone system.

Note: This is a timed message. If you cannot access the telephone system (no dial tone heard), you will have to press the HOME key to hang up, and start again at step 1 of this procedure.

1

2 A B C

3 D E F

4 G H I

5 JKL

6MNO

7P R S 8TUV 9 W X Y

0

HOME

1

2 A B C

3 D E F

Page 40
Image 40
Motorola III operating instructions Conventional Telephone Operation