37General Radio Features Operation (cont.)
Programming the Radio’s Lists (cont.)
Programming the Call List (Trunked MTS 2000 III Models Only)
This feature lets you use the radio’s keypad to change the radio ID numbers assigned to the call list used by the trunked Private Conversation™ and Call Alert™ features.
1.To change the call list radio ID numbers, press the right arrow key ( 
) until “PROG” appears on the display.
2.Press the key below “PROG.” The display changes to show the types of lists (phone, call, etc.) that can be programmed.
3.Press the key below “CALL” or “PAGE” (either choice will access the same call list). The display shows the first member of the call list and the programming mode status annunciator flashes, indicating that the radio is in the program mode. The programming mode annunciator will continue flashing while the radio is in the program mode.
4.To move around in the list, press either the right ( 
) or the left ( 
) arrow key. The right arrow key will take you forwards to the next member of the list; the left arrow key will take you backwards to the previous member of the list. You can also use the keypad to enter the desired member’s position number (any preprogrammed location from 1 through 19) in the list to go directly to that member.
5.When you stop on a member of the list, the display will alternate between showing the member’s name and radio ID number.
1 | 2 A B C | 3 D E F |
4 G H I | 5 JKL | 6MNO |
7P R S 8TUV 9 W X Y
0
HOME
1 | 2 A B C | 3 D E F |
1 | 2 A B C | 3 D E F |
HOME
