Motorola III operating instructions General Radio Features Operation

55General Radio Features Operation (cont.)

Trunked Telephone Operation (cont.)

Calling the Last Number Dialed

1.To send a telephone call to the last number dialed, press the right arrow key ( ) until “PHON” appears on the display.

Note: If your radio has been so programmed, you can press the phone button for quick access to the telephone call feature. This will take you directly to the ”last number dialed” display shown in step 2; skip to step 3.

2.Press the key below “PHON.” The display changes to show the last telephone number dialed. At this point, either:

3a. If your radio is programmed for immediate access, the display shows “PLEASE WAIT” while your radio attempts to access the telephone system. Go to step 4.

Notes:

•This is a timed message. If you cannot access the telephone system (no dial tone heard), you will have to press the HOME key to hang up, and start again at step 1 of this procedure.

•If you are out of range of the trunked system or the phone interconnect is out of service, “NO PHONE” is displayed and a continuous low-pitched tone sounds.

•If the trunked phone interconnect is in use, a busy tone sounds and “PHONE BUSY” is displayed. Your number will automatically be dialed when the phone interconnect becomes available. If you hang up, you will lose your place in line.

or

3b. If your radio is programmed for delayed access, the display does not change. Press the PTT switch. The display shows “PLEASE WAIT” while your radio attempts to access the telephone system.

Notes:

•This is a timed message. If you cannot access the telephone system (no dial tone heard), you will have to press the HOME key to hang up, and start again at step 1 of this procedure.

•If you are out of range of the trunked system or the phone interconnect is out of service, “NO PHONE” is displayed and a continuous low-pitched tone sounds.

1	2 A B C	3 D E F
4 G H I	5 JKL	6MNO

7P R S 8TUV 9 W X Y

0

HOME

1 2 A B C 3 D E F