Motorola III operating instructions General Radio Features Operation

64General Radio Features Operation (cont.)

1	2 A B C	3 D E F
4 G H I	5 JKL	6MNO
7P R S	8TUV	9 W X Y
	0
	HOME

Trunked Telephone Operation (cont.)

5.When you stop on a member of the list, the display will alternate between showing the member’s name and telephone number.

6.To place the telephone call, press the PTT button. The telephone number will be sent out; you will hear tones as they are being sent. When the number has been completely sent out, you will hear either a busy signal or ringing, and the member’s name will be displayed. If you hear a busy signal, go to step 8 to hang up.

7.If the party you are calling answers, carry on with your conversation in the normal manner. Press the PTT switch to talk; release the PTT to listen.

Notes:

•After reaching the number you are calling, you may need to dial an extension number before you can reach your party. If this is the case, enter the extension number from the keypad (MTS 2000 III model only) or (if so programmed) use the arrow keys to find the extension number in the telephone list. If you have live dial, the number will be sent as the keys are pressed. If you have buffered dial, press the PTT switch again to send out the extension number.

•Motorola trunked radios generate a high- pitched go-ahead tone when the radio's PTT switch is released. This is heard by the land- line party and is an indicator to begin talking.

8.When you have finished your conversation, or if the number you are calling is busy or does not answer, press the HOME key or the phone button to send the hang-up code. The radio will return to the home display.