MTS 2000™ FLASHportTM Radio Quick-Reference Card 1 Side 2
SCAN OPERATION (CONT.):
MTS 2000™ FLASHportTM Radio
3.Press key below “ON”; radio returns to home display.
4.Radio starts scanning; scan status annunciator turns on. Turning Scan Off—
1.With scan on: (a) Put scan select switch in “scan off” position, then skip to step 4;or (b) Press ( 
) until display shows “SCAN.”
2.Press key below “SCAN.” Display shows current scan state (“SCAN ON”), then shows “ON” and “OFF.”
3.Press key below “OFF”; radio returns to home display.
4.Radio stops scanning; scan status annunciator turns off.
Deleting Nuisance Mode— | Dynamic Priority Change— |
With radio locked onto mode to be deleted (priority | With radio locked onto mode to be designated as |
modes, and mode selected with | priority 2 (priority 1 mode cannot be changed), press |
cannot be deleted), press | |
sounds. To resume scanning the regular priority 2 | |
deleted mode, leave and reenter scan, or delete a | mode, leave and reenter scan |
different mode. |
|
|
|
Viewing Scan List— |
|
1. Press ( ) until display shows “VIEW,” then press key | 3. Press ( ) to scroll through list members. |
Basic Radio Operation
TURNING THE RADIO ON OR OFF:
Turn on/off/volume control:
clockwise = on/counterclockwise = off.
SELECTING A ZONE AND MODE:
1.Press ( 
) until display shows “ZONE.”
2.Press key below “ZONE.”
3.Press (
) until display shows desired zone name, or enter desired zone number.
4.To store zone shown, press HOME or PTT, or turn mode selector knob.
5.Select desired mode with mode selector knob. The display shows mode’s name.
SETTING VOLUME:
Side Button
(SB) | ||
SB1 | on/off/volume | indicator LED |
| ||
SB2 | control |
|
|
| |
SB3 | 11 | 13 |
9 | 15 | |
| 7 | 1 |
| 5 | 3 |
A = scan off | A | telephone |
B = scan on | B | |
C |
| |
PTT |
|
|
| rotary mode selector knob | |
below “VIEW.” | 4. To exit list viewing, use HOME, PTT, or mode |
2. Press key below “SCAN.” | selector knob. |
Conventional Radio Features Operation
CONVENTIONAL TELEPHONE OPERATION:
Calling Last Number Dialed—
1.(a) Press phone button; or (b) Press ( 
) until display shows “PHON,” then press key below “PHON.”
2.(a) If “PLEASE WAIT” is displayed, skip to step 3; or (b) If “PLEASE WAIT” is not displayed, press PTT.
3.(a) If dial tone is heard, skip to step 4; or (b) If dial tone is not heard, skip to step 6.
4.Press PTT to place call.
5.If called party answers, press PTT to talk; release PTT to listen.
6.Press HOME or phone button to hang up.
Calling a Number Dialed From Keypad—
1. (a) Press phone button; or (b) Press ( 
) until display shows “PHON,” then press key below “PHON.”
2.(a) If “PLEASE WAIT” is displayed, wait until dial tone is heard, then enter phone number from keypad; skip to step 4; or (b) If “PLEASE WAIT” is not displayed, enter phone number from keypad, then press PTT.
3.(a) If dial tone is heard, press PTT; skip to step 5; or (b) If dial tone is not heard, skip to step 6.
4.(a) If your radio has “live dial,” skip to step 5;or (b) If your radio has “buffered dial,” press PTT.
5.If called party answers, press PTT to talk; release PTT to listen.
6.Press HOME or phone button to hang up.
Calling a Phone List Number—
1.Turn radio on and select zone and mode.
2.(a) Listen for transmission, then adjust volume control to a comfortable level; or (b) If radio is so programmed, press volume set button and adjust volume control to a comfortable level.
RECEIVING:
1.Turn radio on.
2.Select zone and mode.
3.Set volume. You are ready to receive on selected zone and mode.
MONITORING (CONVENTIONAL MODES ONLY): Momentarily press (tap) monitor button and listen for voice activity. To put radio in
TRANSMITTING: |
|
| |
Conventional— | Trunked— | ||
1. | Turn radio on. | 1. | Turn radio on. |
2. | Select zone and mode. | 2. | Select zone and mode. |
3. | Set volume. | 3. | Set volume. |
4. | Monitor selected mode to be sure no one else | 4. | Press and hold PTT to talk (transmit); release PTT |
| is using it. |
| to listen (receive). |
5.When mode is clear, press and hold PTT to talk (transmit); release PTT to listen (receive).
General Radio Features Operation
1.(a) Press phone button; or (b) Press ( 
) until display shows “PHON,” then press key below “PHON.”
2.(a) If “PLEASE WAIT” is displayed, skip to step 5; or (b) If “PLEASE WAIT” is not displayed, continue.
3.(a) Press ( 
) or (
) until display shows desired list member, then press PTT; skip to step 4; or (b) Press ( 
) or (
), then enter desired list location from keypad; then press PTT.
4.(a) If dial tone is heard, skip to step 7; or (b) If dial tone is not heard, skip to step 9.
5.(a) If dial tone is heard, skip to step 6; or (b) If dial tone is not heard, skip to step 9.
6.(a) Press ( 
) or ( 
) until display shows desired list member; or (b) Press ( 
) or ( 
), then enter desired list location from keypad.
7.Press PTT to place call.
8.If called party answers, press PTT to talk; release PTT to listen.
9.Press HOME or phone button to hang up.
Making a Manual Access Call From Keypad—
1.(a) Press phone button; or (b) press ( 
) until display shows “PHON,” then press key below “PHON.”
2.Enter telephone system access code.
3. (a) If dial tone is heard, skip to step 4; or (b) If dial tone is not heard, skip to step 6.
4.Enter phone number from keypad.
5.If called party answers, press PTT to talk; release PTT to listen.
6.Enter telephone system
7.Press HOME or phone button; radio returns to home display.
STAT ALERTTM– CALL ALERTTM (PAGE) (DECODE): When Call Alert is received, a series of 4 beeps sound; ( 
) and green LED flashes. Continues until PTT is pressed or monitor button is pressed and released.
STAT ALERT– VOICE
1.When page is received, ( 
) and green LED flash, and
2.Return radio to paging operation by pressing monitor button or, if so programmed, radio will automatically reset.
REPEAT/DIRECT: Repeat = talk through a repeater; transmit frequency not = receive frequency. Direct = talk directly to another portable radio (talkaround); transmit frequency = receive frequency.
Changing Repeat/Direct Setting From Switch— Put repeat/direct switch in desired position.
SECURENET OPERATION
1.
2.If mode can be selected as
3.If mode is programmed for
4.If mode is programmed for
EMERGENCY OPERATION:
Sending Emergency Alarm
1.Press and hold emergency button until LED lights solid red, emergency tone sounds, and display alternates between “EMERGENCY” and current zone and mode.
2.When base acknowledges alarm, 4 beeps sound and radio returns to normal.
Sending Silent Emergency Alarm— Same as above, except no LED, tones, or display indications.
Cancelling Emergency Alarm— Before alarm is acknowledged, press and hold down emergency button (exit tone sounds); radio returns to normal. Also, press PTT or turn radio off (no exit tone sounds).
Sending Emergency Call (Trunked Systems Only)
1.Press and hold emergency button until LED lights solid red, emergency tone sounds, and display alternates between “EMERGENCY” and current zone and mode.
2.Press PTT to request trunked priority assignment.
3.To exit emergency call mode, press emergency button for more than 1 1/2 seconds; emergency- exit tone sounds until button is released.
MUTING KEYPAD TONES:
1.Press ( 
) until display shows “MUTE.”
2.Press key below “MUTE.” Display shows current mute state (“TONES ON”; “TONES OFF”), then shows “ON” and “OFF.”
3.Press key below desired mute state. Radio saves new mute state and returns to home display.
SCAN OPERATION:
Turning Scan On—
1.With scan off: (a) Put scan select switch in “scan on” position, then skip to step 4; or (b) Press ( 
) until display shows “SCAN.”
2.Press key below “SCAN.” Display shows current scan state (“SCAN OFF”), then shows “ON” and “OFF.”
