Motorola III operating instructions Trunked Radio Features Operation

99Trunked Radio Features Operation (cont.)

Call Alert Page Operation (cont.)

Direct Entry of the ID Number to be Call Alert Paged

1.To directly enter the ID number to be Call Alert paged, press the right arrow key ( ) until “PAGE” appears on the display.

Note: If your radio has been so programmed, you can press the page button for quick access to the Call Alert feature. This will take you directly to the “last ID number transmitted or received” display shown in step 2; skip to step 3.

2.Press the key below “PAGE.” The display changes to show the last ID number transmitted or received. You can now enter the ID number to be paged.

3.Enter the new six-digit ID number from the keypad. On the display, the old ID number disappears and the new digits appear as they are being entered. The cursor flashes to indicate the location of the next number to be entered.

Notes:

•If fewer than six digits are entered and the PTT switch is pressed, you will hear a bad- keypress tone. A bad-keypress tone will also be heard if you try to enter a seventh digit.

•Once you have started entering numbers, the

left arrow key ( ) will function as a backspace key. Pressing this key will cause the last digit entered to be erased, and the cursor to move to the left. When the last digit has been erased, an additional press of this key will cause the last member of the preprogrammed call list to be displayed; pressing the right arrow key will show the first member of the list.

1	2 A B C	3 D E F
4 G H I	5 JKL	6MNO

7P R S 8TUV 9 W X Y

0

HOME

1 2 A B C 3 D E F

1	2 A B C	3 D E F
4 G H I	5 JKL	6MNO

7P R S 8TUV 9 W X Y

0

HOME