Marquis EUROMW5, MW10 manual TouchLiteTM Feature Programming, Programming TouchLite tm

TouchLiteTM FEATURE PROGRAMMING

Feature Description

TouchLitetm is a new innovation that integrates the visual message waiting lamp and a speed dial button, all in one. It allows easy access for guests to retrieve messages. When the message-waiting lamp lights to notify the guest that a message is waiting.

A simple press of the red TouchLitetm key connects the guest to the message center or front desk. TouchLitetm also adds an additional memory location to this telephone.

Programming TouchLite tm

1.Lift the handset.

2.Press the STORE button to enter the programming mode.

3.Press the red TouchLite tm button where the number is to be stored.

4.Enter the number to be stored using the numeric dial pad. Using the FLASH or PAUSE key to insert a flash or pause in the number string. A flash or pause is considered as a digit in the digit string.

5.Press the STORE button to store the number at the selected location and to exit programming mode. A short beep should be heard to indicate a valid entry.

6.Hang up the handset.

Note: if a double beep is heard at any time during the programming, an invalid entry has been entered and the whole process must be started all over again.

14