Motorola III operating instructions 8TUV

100Trunked Radio Features Operation (cont.)

1	2 A B C	3 D E F
4 G H I	5 JKL	6MNO
7P R S	8TUV	9 W X Y
	0
	HOME

Call Alert Page Operation (cont.)

4.Press the PTT switch to send the ID number.

Note: If the ID number you are trying to send is not a valid ID number for the system, the display will show “INVALID ENTRY” for a few seconds, then the radio will go back to the beginning of step 3 again.

5a. If you hear one beep, the ID number has been received by the system, but the radio you are paging is not on the air; your radio remains in the Call Alert mode. You can either go back to step 4 and press the PTT switch to send the ID number again, or press the HOME key to hang up and return to the home display.

Note: If after six seconds the called radio fails to acknowledge the alert, a low-pitched alert tone sounds and the display changes to "NO ACKNOWLEDGE". Try again or press the HOME key to exit

or

5b. If you hear five beeps, the ID number has been received by the system, and the radio you are paging is on the air and has received your page. The radio automatically returns to the home display.