
56General Radio Features Operation (cont.)
1 | 2 A B C | 3 D E F |
4 G H I | 5 JKL | 6MNO |
7P R S | 8TUV | 9 W X Y |
| 0 |
|
| HOME |
|
Trunked Telephone Operation (cont.)
•If the trunked phone interconnect is in use, a busy tone sounds and “PHONE BUSY” is displayed. Your number will automatically be dialed when the phone interconnect becomes available. If you hang up, you will lose your place in line.
4.If the access was successful, you will hear a dial tone. The display will again show the last number dialed.
5.The telephone number will be sent out; you will hear tones as they are being sent. When the number has been completely sent out, you will hear either a busy signal or ringing. If you hear a busy signal, go to step 7 for
6.If the party you are calling answers, carry on with your conversation in the normal manner. Press the PTT switch to talk; release the PTT to listen.
Notes:
•After reaching the number you are calling, you may need to dial an extension number before you can reach your party. If this is the case, enter the extension number from the keypad (MTS 2000 III model only) or (if so programmed) use the arrow keys to find the extension number in the telephone list. If you have live dial, the number will be sent as the keys are pressed. If you have buffered dial, press the PTT switch again to send out the extension number.
•Motorola trunked radios generate a high- pitched
7.When you have finished your conversation, or if the number you are calling is busy or does not answer, press the HOME key or the phone button to send the