IUP CLOCKANDOVENCONTROL
to cancelall |
|
|
|
|
| and hold these |
operations |
| Cancel |
|
|
| pads to enter |
except the |
|
|
|
|
| time, oven |
time of day will |
|
| _Oven on |
|
|
|
reappearin the |
| Se• CleanJ |
|
| to select HI or | |
TIMER.display The | _ | L. Lo¢k | _, | __ | temperatureorLO broil. |
ABOUT THE FUNCTION PADS
•Function pads are the BAKE,
CANCEL pads.A beepwill soundwhen these pads are pressed.
•No beepwill sound when the • or • pad is pressed,
•All function pads except the CANCEL
pad feature an indicatorlight. | _'_ | |
Whenthe BAKE or BROILpad is | [ | """" J |
pressed,the indicatorlight will | _ |
|
turn on to let you know that the | l | Bake J |
oven is set for this operation. |
|
|
Indicatorlights on
flash whenthe pad is pressed. These indicatorlights
will stopflashing but will remain lit once the function starts.
•If an indicatorlight on a function pad is lit and you set a second operation:
-Eitherthe control will not accept the operation or
-The indicatorlighton the first pad will "dim" slightly and the indicatorlight on the pad you just pressed
will be "full on." This lets you knowthat you have set the control for two operations.
Forexample: if you set the oven | _"DIM" |
timing operation,the indicatorlight | l BakeI |
to bake at 350°Fand then set a | |
on the BAKE pad will "dim" and |
|
the indicatorlight on the TIMER pad will be "full on."
The display will show the operation | _"FULL |
|
for the pad with the "full on" indicator | Timer ON" | |
light. Press the function pad Withthe | [ | J |
"dim" indicatorlight to recallthat operation.
HOW TO SET CLOCK
1. Press CLOCK pad.
2. Press or press and hold | |
| then |
•or • pad until correct time of day appears in
display.
Displaywill flash when power is suppliedto unit. Press CLOCK pad. To recalltime of day when another
functionClocktimise displayedcannot be. changed if oven is set for timed bake or delayed clean operation. Cancelthe operation beforesetting the clock.
If timer is in use, press CLOCK pad once to recallthe time of day or twice to reset the time of day.
CLOCK DISPLAYDISABLE FEATURE
If you preferthat the time of day is not displayed:
1. Press and hold both | _ |
pads for 3 seconds, | and Lcan |
CLOCK and CANCEL |
|
When clock display is
disabled,press CLOCK pad to recalltime of day for 4
seconds. Display will then blank.
If a powerfailure occurs when the clock has been
disabled,the display remains blankand will not flash when power is restored.
Repeat step1 to reactivateclock feature.