Maytag 8111P375-60 Idaboutyourrange, To turn on the oven light Push, Oven Racks

I(DABOUTYOURRANGE

OVEN LIGHT

iAc o ,o,t

Disconnect power to range by tripping circuit

breakeror removingfuse before replacing light bulb.

•Be sure bulb is cool beforetouching or replacing bulb.

•Use a dry potholderto prevent possible harm to hands when replacing bulb.

•Do nottouch hot bulb with a damp cloth as this may causethe bulbto break.

To turn on the oven light: Push in

rocker switch located on the backguard.

To replace oven light bulb:

1. Disconnectpowerto range.

2.Hold bulb cover in place then slide wire retaineroff

while removingwire retainer.

cover.NOTE: Bulb coverwill fall if not heldin place

3.Removebulb cover.

4.Removelight bulband replacewith a 40 watt appliance bulb.

5.Replacebulb cover and secure with wire retainer.

6.Reconnectpower to range. Reset clock,

BULBCOVER

OVEN RACKS

A c oT,oI. /

Do not attempt to changethe rack position when the

oven is hot. J

The oven rack is designed with a safety lock-stop position. This prevents the rackfrom accidently comingcompletely

out of the oven when pullingthe rack out to add or remove food.

To remove oven rack:

1. When rack is cool, pull rackstraight out until it stopsat

NOTE: If it is necessaryto change rack positionwhen rack is hot, use potholdersto protect hands.

2. Tilt the front end of the rack up.

3. theContinuepullinglock-stoppositionrackout. of oven.

_,	_						/	RACK
		,\_				C	J	SUPPORT
_	_	\	/	/	I	/	_
	_k\	\ \	\	/	I	/_
		"			-

To replace oven rack:

1.Placerack on the rack supportsin oven.

2.Tilt the front end of the rack up slightly.

3.Slide rackback until it clears the lock-stopposition.

4.Lower front of rack and slide rack straight back into oven.

f

/	5.	IMPORTANT:Pull rack outto the lock-stop position to
WIRE		be sure rack is correctly replaced.
	6. If properly installed, rackwill not come out of oven
RETAINER
		unlessthe front edge is lifted up.
	7.	Push rack back into oven and close oven door.