Unpacking
Inspect the amplifier during un- packing. If any damage is found, notify your dealer immediately. Be sure to save the carton and all packing materials. Should you ever need to ship the unit back to Peavey Electronics, one of its service centers, or the dealer use only the original factory packing.
Installation
PV professional power amplifiers are designed for durability in com- mercial installations and provide the quality performance required in studio and home applications.
mm)depth are designed to mount in a standard 19” rack. Rear mount- ing ears are provided for additional support and should be utilized in portable racks. The minimum rack depth required from the mounting surface is 17” (432 mm) to allow adequate connector clearance.
Basic Setup
Rack mount the amplifier in the location where it is to be used, re- membering to allow for adequate access and cooling space. Connect your mixer or equalizer to the IN- PUT connector and connect to the
(7)to the amplifier and then to a suitable electrical outlet to allow proper current draw. With both channel gain (dB) controls at their fully counterclockwise +32 set- tings, turn the POWER switch to ON, and slowly raise the gain con- trols to desired settings. Normally, the HF and LF controls should be at the same setting, but should your venue require more low end or more high end, you can make this adjustment. Please carefully re- view this manual. It covers all this information in greater detail.
