SPECIFICATIONS* | Q™F131 | Q™ 215B | Q™F215 |
Filter Q | 4.77 | 2.3 | 2.3 |
Filter Frequencies (Hz) | 20, 25, 32, 40, 50, 63, 80, | 25, 40, 63, 100, 160 | 25, 40, 63, 100, 160, |
| 100, 125, 160, 200, 250, | 250, 400, 630, 1 K, 1.6 K, | 250, 400, 630, 1 K, 1.6 K, |
| 315, 400, 500, 630, 800, | 2.5K, 4 K, 6.3K, 10 K, 16 K | 2.5 K, 4 K, 6.3 K, 10 K, 16 K |
| 1 K, 1.25 K, 1.6 K, 2 K, 2.5 K, |
|
|
| 3.15 K, 4 K, 5 K, 6.3 K, 8 K, |
|
|
| 10 K, 12.5 K, 16 K, 20 K |
|
|
Maximum Boost |
|
|
|
and Cut Filter | +12 dB / | +15 dB / | +12 dB / |
Output Noise |
|
|
|
Bypass Mode | |||
Filter Mode (Flat) | |||
| ALL MODELS |
| |
Frequency Response: | ± 1 dB (20 Hz – 20 kHz) |
| |
Distortion: | .002% (20 Hz – 20 kHz) |
| |
Input Impedance: | Balanced 20 K ohms (equal impedances to ground) |
| |
Output Impedance: | 660 ohms |
|
|
Maximum Input Level: | +18 dBV (8 V RMS) |
| |
Maximum Output Level: |
| ||
Nominal Input Level: | 0 dBV (1 V RMS) |
|
|
Nominal Output Level: | 0 dBV (1 V RMS) |
|
|
Input Headroom: | Nominal 18dB |
|
|
Output Headroom: | 18 dB |
|
|
Maximum Boost and |
|
|
|
Cut Gain: | +15 dB / |
|
|
Low Cut Filter: | 40 Hz @ 18 dB per octave |
| |
Power Consumption: | Domestic: 120 VAC, 60 Hz, 12 Watts |
| |
| Export: 220/230 VAC, 50/60 Hz, 12 Watts |
| |
Dimension: | 3.5" (89 mm) H x 19" (483 mm) W x 7.375" (187 mm) D | ||
Weight: | 7.8 lbs. (3.54 kg) |
|
|
*All specifications are typical unless otherwise noted. 0 dBV = 1 volt. All specifications are referenced to nominal output level (0 dBV) unless otherwise stated.
NOTE: All specifications measured at 1 V RMS input, unbalanced output, sliders at mid position, and all switches out unless otherwise noted.
19
