Peavey S-24 manual Stereo Channel in to any output DB max. gain

Hum & Noise

Output	Residual Noise	S/N Ratio (Ref. +4 dBu)	Test Conditions
Master L/R	-100 dBu	104 dB	All faders down
Mono	-85 dBu	89 dB	Master fader nominal, All channels muted
	-80 dBu	84 dBu	All controls nominal‚ mic gain min.
Left/Right	-100 dBu	104 dB	All faders down
	-85 dBu	89 dB	Master Fader Nominal‚ Ch. Faders Down‚ Ch. Muted
	-80 dBu	84 dBu	All controls nominal‚ mic gain min.

(Hum & Noise measurements: 22 Hz to 22 kHz BW)

Gain		Dimensions ( H x W x D)
Mic input gain adjustment range:	0 dB to 57 dB	S-24:	28.250" (71.8 cm) Wide
Mic input to any output:	74 dB (max. gain)		17.250" (43.8 cm) Deep: on table top
Stereo Channel in to any output:	36 dB (max. gain)		6.250" (15.9 cm) High: on table top
Frequency Response		Weight
Mic input to L/R output:	20 Hz to 20 kHz (+0 dB / -1 dB)	S-24:	25.7 lbs. (11.7 kg)
Total Harmonic Distortion (THD)		Power Requirements
< 0.05%, 20 Hz to 20 kHz Mic to Left/Right Output (22 Hz to 22 kHz BW)		S-24:	DOM: 120VAC 60 Hz 55 W Nominal

Equivalent Input Noise (EIN)

-129 dBu ( input terminated with 150 ohms‚ max gain)

Crosstalk

>80 dB adjacent input channels (20 Hz to 20 kHz)

>70 dB Left to Right outputs (20 Hz to 20 kHz)

Common Mode Rejection Ratio (mic input) 60 dB min. (20 Hz to 20 kHz)

70 dB typ. @ 1 kHz

Meters

12-segment peak reading (0 dB = +4 dBu)

Signal/Overload Indicators

Red LED illuminates 2 dB below clipping

Hum & Noise: -97 dB below rated output

Damping Factor: > 100 @ 1 kHz‚ 4 Ohms

Input Impedance: 4.7 k Ohms

30