Peavey manual English, Windsor Studio All-TubeCombo Amplifier

ENGLISH

Windsor Studio™

All-Tube Combo Amplifier

Congratulations on your purchase of the new Windsor Studio tube combo amplifier from Peavey. The Windsor Studio offers more “bang for your buck” than any other combo amp on the market and the tones that you will experience from this 1 x 12” Class A powerhouse will more than hold their own with the most sought after boutique models on the market, at a fraction of the price. That said, the Windsor Studio is still made from top-shelf components with all of the reliability that you have come to expect from Peavey.

This versatile new single-channel combo offers several new features that make it perfectly suited for any guitar amp application, whether it be home recording or live use. The all-new Recording Output circuit provides a microphone- simulated XLR connection for patching to PA or recording gear. Since this 100% passive (no clipping) circuit taps directly from the speaker output, the resulting sound gives a simulation of a microphone strategically placed in front of whatever speaker you are using….no more tripping over mics on stage! It also features the new “Power Sponge™” feature, which is a

continuous power level control, between the output and speaker, which provides a constant load impedance to the output, with respect to the setting of the control and the impedance of the speaker….the result is a “transparent” output attenuator

that is variable from full power to none at all. Furthermore, the “Power Sponge” setting does not affect the level or the Recording Output. In addition, a variety of common large power tubes may be used without the need for re-biasing. The Windsor Studio is the perfect combination of simplicity and flexibility.

Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC line voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit. Each product feature is numbered. Refer to the front panel diagram in this manual to locate the particular features next to its number.

Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.

FEATURES:

•Class A Power Amp can use various octal power tubes including EL34 (stock), 6L6GC, 6550, 6CA7, KT88, KT66, or any variation on these types.

•2 x 12AX7/ECC83 Preamp tubes

•0-20W (rms) into 4, 8, or 16 Ohms with Power Sponge™ output power attenuator

•No negative feedback in Power Amp

•High & Low Gain Inputs

•Preamp Volume

•Low, Mid, and High EQ

•Footswitchable Boost function

•Footswitchable Effects Loop

•Master Volume

•Spring Reverb

•Transformer balanced XLR Recording Output w/passive mic simulator

•XLR Ground Lift switch

•Dual Speaker Outputs

•Impedance Selector

•1/4” TRS footswitch jack for Boost and Loop defeat

•Jeweled Pilot Lens

•Power and Standby switches

•12” Blue Marvel Speaker

Ventilation: For proper ventilation, allow 24" clearance from nearest combustible surface.