Dynamics
Release:
The Release value sets the amount of time for the compressor to recover from the compressed state once the level falls below the threshold level. We recommend release times of 5x to 10x the Attack time in normal use.
Gain:
This adjustment serves to compensate for the loss in average signal strength due to compression. The range is
In/Out:
This button toggles to bypass the dynamics section.
XOver Screen
The output channel numbers appear across the top of the screen. Depending on the configuration template chosen they may appear together as blocks representing
Each bandpass filter associated with the crossover is represented graphically on the screen. The two slopes represent the lower and upper frequencies of the bandpass and the plateau represents the level of the bandpass. The intersection of slopes represents the electrical crossover point(s).
Type:
Available filters are: Flat, Butterworth 6, 12, 18, 24, 30, 36, 42, and 48 dB/oct.; Bessell 12, 18, 24, 30, 36, 42 and 48 dB/oct;
Frequency:
The VSX™ is a very powerful tool and as such the frequency points are independent, allowing
selectable in 1 Hz steps from 20 Hz to 20kHz. They may also be selected in the setup/configuration screen.
Level:
The levels of the crossover sections are independently adjustable from
13