Peavey XR 8300, XR 8600 manual Gain, Frequency Response, Total Harmonic Distortion

XR® 8300 & XR® 8600 Specifications

Input Specifications

	Input Z	Input Gain		Input Levels		Bal
Function	(ohms)	Control					Connector
	Min	Settings	Min**	Nominal*	Max	Unbal
Lo-Z Mic	2k	Max w/o	-59dBu	-29dBu	-11dBu	Bal	XLR Pin 1 Gnd
(150 ohms)		pad (50dB)	-34dBu	-4dBu	+14dBu		Pin 2 (+)
		Max w/pad					Pin 3 (-)
		(25dB)
Line Input	22k	Max w/o	-27dBu	+2dBu	+21dBu	Bal	1/4" TRS;
		pad (30dB)	-2dBu	+27dBu	+26dBu		Tip (+)
		Max w/pad					Ring (-)
		(25dB)					Sleeve Gnd
Tape	20k	Max Gain	-26dBu	+4dBu	+21dBu	Unbal	RCA jacks
		(30dB)

0dBU = 0.775V (RMS)

**Minimum input level (sensitivity) is the smallest signal that will produce nominal output (4dBu)with channel and master controls set for maximum gain.

* Nominal settings are defined as all controls set at 0dB (or 50% rotation for rotary pots).

Output Specifications

Function	minimum Load Z	Nominal		Max	Bal	Connector
	(ohms)				Unbal
Main	600	+4dBu		+21dBu	Unbal	1/4" Phono Tip (+)
						Sleeve Ground
Monitor	600	+4dBu		+21dBu	Unbal	1/4" Tip (+)
						Sleeve Ground
Tape	10k	-10dBu		+10dBu	Unbal	RCA
+4dBu = 1.23V (RMS)
Gain:
Mic Input to Main Output				60dB (Max Gain)
Line Input to Main Output				30dB (Max Gain)
Frequency Response:
Mic Input to Main Output				20Hz-20kHz +0dB/-1dB
Line Input to Main Output				20Hz-20kHz +0dB/-1dB
To Power Amplifier Output				40Hz-20kHz +0dB/-1dB
Total Harmonic Distortion:
<0.01% 20Hz-20kHz Mic Input to Main/Monitor Output at			Nominal Level (20Hz-80kHz BW)
<0.01% 20Hz-20kHz Line Input to Main/Monitor Output at Nominal Level (20Hz-80kHz BW)
<0.005% Typical @ 1kHz
Graphic Equalizer:
Filter Frequencies				80, 250, 500, 1k, 2k, 4k, 10k
Maximum Boost and Cut				+12dB Boost, -12dB Cut

Features and specifications subject to change without notice.

15