Attaching Adapter Plate to Screen with VESA® 200 x 100 or 200 x 200 Mounting Pattern
NOTE: For VESA 75 mm and 100 mm patterns, see following page.
3 | Attach hook bracket (M) to adapter plate (N) using |
four M5 x 6 mm screws (K) and #10 washers (L) as |
shown. | M |
|
K
N
L
WARNING
•If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not tightly secured, damage may occur to screen or product may fail.
FOR VESA® 200 x 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach | |
| adapter plate (N) to back of screen using four M4 x |
10 mm screws (E) as shown below.
*NOTE: If screw (E) gets less than three threads of engagement, attach adapter plate (N) to back of screen using four M4 x 20 mm screws (F) and four spacers (C) as indicated below.
Skip to step 4 on page 9.
FOR VESA® 200 x 200 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach adapter plate (N) to back of screen using four M6 x 12 mm screws (G) as shown below.
*NOTE: If screw (G) gets less than three threads of engagement, attach adapter plate (N) to back of screen using four M6 x 20 mm screws (I). If screw (I) still gets less than three threads of engagement, use four M6 x 30 mm screws (J).
Skip to step 4 on page 9.
N
E
*For screens with a hole pattern in a pocket, spacers (C) go between adapter plate (N) and
screen.C
N 
G
7 of 46 | ISSUED: |
