Peerless Industries PRS-UNVP-W Installation to Extension Column / Ceiling Plate, Skip to step

Installation to Extension Column / Ceiling Plate

1	NOTE: Refer to accompanying instructions with ceiling plates (sold separately) for installing these models to
	ceiling.

Screw projector mount assembly (A) onto extension column as shown in figure 1.1.

NOTE: For 3/4" extension columns, reducer ACC 913 will be required as shown in figure 1.2. Tighten swivel stop screw against extension column, flush mount tube or reducer using 4 mm security t-wrench (L) as shown in figure 1.3.

NOTE: Swivel stop screw is used to jam against threads of extension column, flush mount tube or reducer to prevent any excess movement of projector mount assembly (A). Do not overtighten screw; overtightening screw will damage threads making it difficult to separate products.

Skip to step 5.

1 1/2" EXTENSION	3/4" EXTENSION COLUMN
COLUMN	(SOLD SEPARATELY)
(SOLD SEPARATELY)
UL LISTED EXT OR ADJ
SERIES)
	ACC 913
	(NOT UL LISTED)
	(SOLD SEPARATELY)

A		A
	BACK OF	BACK OF
		MOUNT
	MOUNT
fig. 1.1		fig. 1.2

CMJ 455

(SOLD SEPARATELY)

SWIVEL STOP

SCREW

fig. 1.3

4 of 12 ISSUED: 09-19-05 SHEET #: 055-9441-5 10-31-08

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.