Installation to Threaded Rod

(Not evaluated by UL - Professional installation only)

4

Thread two 3/8-16 hex thin nylon-insert locknuts (not included) on two 3/8-16 threaded rods (not included) to the

desired height of projector mount assembly. Attach projector mount assembly (A) to the two 3/8-16 threaded rods

using two 3/8-16 hex thin nylon-insert locknuts as shown in figure 4.1 or figure 4.2.

3/8 -16 THREADED ROD

(NOT INCLUDED)

3/8 -16 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)

A

FRONT OF

MOUNT

3/8 -16 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)

fig. 4.1

3/8 -16 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)

3/8 -16 THREADED ROD

(NOT INCLUDED)

3/8 -16 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)

A

FRONT OF

MOUNT

fig. 4.2

7 of 12

ISSUED: 09-19-05 SHEET #: 055-9441-5 10-31-08

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-729-0307 or 708-865-8870.

Page 7
Image 7
Peerless Industries PRS-UNVP, PRS-UNV-S Installation to Threaded Rod, Not evaluated by UL Professional installation only