![](/images/new-backgrounds/1126568/12656811x1.webp)
Attaching Hook Bracket to Flat Panel Screen Using VESA 75 and 100 mm mounting patterns
2 | Thread M5 phillips screws (C) to hook bracket (B) |
making the screws flush with bracket as shown in |
figures 2.1 and 2.2.
B
C
fig. 2.1
B
C
fig. 2.2
WARNING
•If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail.
5 FOR VESA 75 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook bracket (B) to back of screen using four M4 x 10 mm screws (D) as shown below.
*Note: If hole pattern is in a pocket, attach hook bracket (B) to back of screen using four M4 x 20 mm screws (E) and four spacers (F) as indicated below.
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook bracket (B) to back of screen using four M4 x 10 mm screws (D) as shown below.
B
D
*For screens with a hole pattern in a pocket,
spacers (F) go between adapter plate (B) and
screen.F
D
B
6 of 23 | ISSUED: |