Peerless Industries SS550P manual J L Ha, DETAIL fig, Slot, 6 of, Detail

6	Loosely attach six 1/4-20 x 12 mm screws (L),
	washers (O), and 1/4-20 nuts (N) to screen mount

bracket (A).

7	Slide screen mount bracket (A) onto upright (H) so that
	1/4-20 nuts (N) slide into slots of upright (H) as shown

in figure 7 and detail 2. Slide screen mount bracket to desired position, level, then tighten 1/4-20 x 12 mm screws (L) using 4 mm allen wrench (R).

	N		A
		N	L
		H	SLOT
L		DETAIL 2	H

O A

fig. 7

8 Snap top cover (J) onto upright (H).

9	Insert two 1/4-20 x 12 mm screws (L) into screen
	mount bracket (A), leaving 1/8" of exposed thread as

shown in figure 9 and detail 3.

J

L

HA

1/8"

DETAIL 3

fig. 9

6 of 11 ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08