= Vertical bar in left or right margin indicates change or addition.
| ® |
| BK4000/BK4024/BK4220 Series |
| Blower Kit |
| Installation/Operation |
| Manual |
1.0 WARNINGS | 2.0 SCOPE |
Prior to installation and use of this product, the following WARNINGS should be observed.
1.Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes.
2.Unless the unit is specifically marked as a NEMA Type
4.Only use replacement parts recommended by
PELCO.
The information contained within this manual covers the installation and operation of the BK4000/BK4024/ BK4220 Blower Kits. Please familiarize yourself with the information in this manual prior to installation and operation.
2.1 DESCRIPTION
The BK4000/BK4024/BK4220 Blower Kits are engi- neered for installation in the EH4014 and EH4018 En- closures. The BK4000 requires 120 VAC, the BK4024 requires 24 VAC, and the BK4220 requires 230 VAC.
All units can be used in conjunction with the corre- sponding Heater Kit.
BK4000 requires 4 watts at 120 VAC, 60 Hz. BK4024 requires 3 watts at 24 VAC, 60 Hz. (CE) BK4220 requires 4.8 watts at 230 VAC, 60Hz. (CE)
NOTE: Once installed, the blower kit will reduce the maximum camera/lens length specified by 1- 3/4 inches.
PELCO • 300 W. Pontiac Way, Clovis, CA
FAX (800)